Hobby & Collectables store with the theme (spare) Model Railway Parts

Retrofit kit for all modern 26.4 cm / 10-3/8", and 27 cm / 10-5/8" Märklin H0 cars with guide mechanisms.

The LokPilot 5 is the most important member of the LokPilot family and is suitable for almost all questions relating to locomotives with gauge H0 and 0.

For cars 43581-43586. The kit consists of a pickup shoe and a ground spring, a circuit board with 10 light bulbs, and a current-conducting coupler.

Decoder for the 2035001 Plan U 115 Red.

Smoke generator for class 80, class 36, class 03.10 and „Württemberger C“/class 18.1 for analogue and digital locomotives.

The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all of the properties, but the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analogue AC systems. However, this lack of flexibility is rewarded with a lower price.

The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all of the properties, but the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analogue AC systems. However, this lack of flexibility is rewarded with a lower price.

The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed circuit boards and the latest manufacturing technology, it is so small with only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm) that it can be used even in very small locomotives Nominal sizes Z, N or TT can accommodate. Nevertheless, functionality and robustness were not spared compared to the larger versions.

Interior lighting unit for double-deck coaches (does not suit for control-cab coach).

Highly detailed functional lantern for epochs II-III fitting to H0 scale waggons. Maintenance free due to LED lighting. Scope: 2 LED lights with boards, rectifier and 2 resistors.

This kit is for Minitrix cab control cars produced starting in 2021. It consists of an LED light bar (warm white). The LED light bar has an electrolytic capacitor for power buffering (protection against flickering) and a dimmer (potentiometer).

This kit is for Minitrix passenger cars with a length over the buffers of 165 mm / 6-1/2" (exceptions are passenger cars based on the "Silberlinge" / "Silver Coins" and with current pickup from one conductor per truck. It consists of an LED light bar (warm white) and pickup springs. The LED light bar has an electrolytic capacitor for power buffering (protection against flickering) and a dimmer (potentiometer).

This kit is for all Minitrix passenger cars with current pickup from one each conductor per truck. It consists of an LED (warm white) light strip that can be shortened and pickup contacts. The LED light strip is equipped with an electrolytic capacitor to buffer power (protection against flickering) and a dimmer (potentiometer).

This kit is for all Minitrix passenger cars with current pickup from one each conductor per truck. It consists of an LED (sunny yellow, for earlier eras) light strip that can be shortened and pickup contacts. The LED light strip is equipped with an electrolytic capacitor to buffer power (protection against flickering) and a dimmer (potentiometer).

Same as 7330, but for shorter express train passenger cars. For cars 41351, 41361, 42383 and 42751.

For cars 42101, 42131, 4214, 42141, 42142 and 4229. The kit consists of a pickup shoe and a ground spring, a light diffuser, a light socket and a light bulb.

For cars 4131, 4132 and 4133. The kit consists of a pickup shoe and a ground spring, an adjustable light diffuser, 2 light sockets and 2 light bulbs.

For cars 42168, 42171, 4227, 4255-4257, 42551-42571, 4264, 4265, 4282, 4285, 4286, 4327, 4368, 4369 and 4384. The kit consists of a pickup shoe and a ground spring, a light diffuser with light sockets and 2 light bulbs. This kit can be used with the 7319 current-conducting close coupler.

Interior lighting unit for express coaches.

Interior lighting unit for passenger coaches of length 282 mm.

LED interior lighting kit to replace the item 9447.

Install from below on a locomotive.

LED lighting unit for lighting rear of article 4098 and variants. With light change-over.

Interior lighting unit for passenger coaches with overall length 264 mm.

Interior lighting unit for 6-axled passenger coaches.

Type SBS 10 for older design locomotives. Interchangeable with 7218.

Type SBS 65 for modern locomotives. Interchangeable with 7218.

Interior lighting unit for IC/EC control cab coaches. Spare bulb: 9530

For cars 4085 and 4087. The kit consists of a pickup shoe, light diffuser, 2 light sockets, and 2 light bulbs.

For cars 43241, 43250, 43251, 43260 and 43261. The kit consists of a pickup shoe and a ground spring, a light diffuser with light sockets, 2 light bulbs, and a current-conducting close coupler.

Interior lighting unit for coaches with overall length 87 mm with close coupling mechanism.
Current consumption approx. 50 mA. Spare bulb: 9530

These springs are for the 73400 or 73401 lighting kits in conjunction with the 72020 current-conducting couplers. This is a set with 5 ground springs for installation in the car trucks.

Assembly kit: Contains a 300 mm flexible strip conductor, 5 bulb carriers, 5 bulbs 16 V/32 mA, 2 wheel current pick-up contacts, fastening material.

Replacement bulbs for the illumination of the ferris wheel (art. 140312), 5 coloured and 1 clear bulb.

To convert wagons without close-coupling mechanism for true close coupling operation. Content: 2 close-coupling mechanisms and 2 PROFI coupling heads 9570 (adjustable height).

To fit to older wagons which do not have close-coupling.Content: 2 close-coupling mechanisms and 2 coupling heads 6570 (adjustable height).

Universal coupling for NEM 362 standard coupler pocket.Content: 12 pieces/package.

The 72020 current-conducting coupler, which can be uncoupled, is an alternative or conversion option for the current-conducting rigid coupler drawbars in the 7319 conversion set.

A bright light in the cars: white LEDs.

This is a universal circuit board with two red LEDs for use with the new generation UIC-x and TEE cars in the Märklin H0 program (car length 28.2 cm / 11-1/8").
2 permanently attached connecting wires.

This is a special circuit board with two red LEDs for the new generation of commuter cars in the Märklin H0 program (car length 28.2 cm / 11-1/8"). 2 permanently attached connecting wires.

AC pick-up.Long version.Length 56 mm.

10 Relex coupler heads. These couplers can be used on locomotives and cars with standard coupler pockets (NEM 362).

Current consumption approx. 50 mA.

For passenger coaches with an overall length of 165 - 170 mm. Current consumption ca. 50 mA.

Wheel diameter: 9 mm.Axle length: 24.75 mm.Content: 2 pieces/package.

For cars 4035, 4038, 4039, 4107 and 4108. The kit consists of a pickup shoe with a light socket and a light bulb.

RP-25 wheel set for direct current, with split axle. Wheel diameter: 11 mm.Axle length: 24.75 mm.Content: 2 pieces/package.

Wheel diameter: 11 mm.Axle length: 24.75 mm.Content: 2 pieces/package.

This is for the 73400 lighting kit. It has an asymmetrical pickup shoe and a ground spring.

For the 73400 interior lighting kit. Includes a symmetrical pickup shoe and a ground spring.

For the 73400 interior lighting kit. Includes an asymmetrical pickup shoe and a ground spring.

Wheel diameter: 11 mm.Axle length: 24.75 mm.Content: 2 pieces/package.

Wheel diameter: 11 mm.Axle length: 24.75 mm.Content: 2 pieces/package.