Hobby & Collectables store with the theme Signals

2 signals on one mast without additional connections. Block signal for use on main lines. Distant signal for use before a block signal or an entry signal.

The signal has 2 independent semaphores and an open narrow mast. The signal changes from red to green or red to green/yellow.

The signal has 2 independent semaphores and an open lattice mast. The signal changes from red to green or red to green/yellow.

With filigree brass mast and authentic varnishing. For authentic slow motion function only item 5216 slow speed resistor is required. Integrated main switching contacts arrange authentic stop. Next main signal shows stop. With printed signal disk and signal arm, bulbs and 2 underfloor drive units. Signal aspects Vr0, Vr1 and Vr2. Spare bulb: Item 6200. Height: 5,1 cm.

This is a signal mechanism with integrated circuits for controlled stopping of digital locomotives with high-efficiency propulsion.

The signal has a semaphore and an open narrow mast. The signal changes from red to green.

Changes from red (Hp0) to green (Hp1) or green/yellow (Hp2) and controls track power with double solenoid mechanism with additional third solenoid for the green/yellow aspect. 2 additional hand levers. With base plate. Width 30 mm / 1-3/16*. Length 95 mm / 3-3/4*. Height 90 mm / 3-9/16*.

With filigree lattice mast made of brass in true-to-original paint, printed signal wings and underfloor compact drive with integrated train control. Maintenance-free thanks to LED lighting.

Product information "H0 Semaphore home signal, small mast, with 2 coupled arms" With filigree latticed brass mast and authentic varnishing. Printed signal arms. Underfloor drive unit with integrated automatic train control. Maintenance free due to LED lighting. Signal aspects Hp0 and Hp2. Height: 10,3 cm.

With filigree brass mast and authentic varnishing. For authentic slow motion function only item 5216 slow speed resistor is required. Integrated main switching contacts arrange authentic stop. Next main signal shows stop. With printed signal disk and signal arm, bulbs and underfloor drive unit. Signal aspects Vr0 and Vr2. Spare bulb: Item 6200. Height: 5,1 cm.

Yard signal for use in switching areas.Prototypical thin pipe mast.The Sh1 aspect is correct with 2 white lights.

The signal has a movable disk. The signal changes from yellow/yellow to green/green. It has a double solenoid. A base plate is included.Width 28 mm / 1-1/8". Length 65 mm / 2-9/16". Height 73 mm / 2-7/8".

With filigree brass mast, authentic varnishing, printed signal disk and signal arm, and underfloor drive unit. Integrated main switching contacts arrange authentic train stop. For authentic slow motion only item-No. 5216 slow speed resistor is required. Maintenance free due to LED lighting. Signal pictures Vr0, Vr1 and Vr2. Height: 32 mm.

With filigree brass mast, authentic varnishing and underfloor drive unit. Disk is movable and lighted. Maintenance free due to LED lighting. Different kinds of block signals are possible. Whereas block signal item 4517 is a version with flange socket which is single standing by the track, block signal item 4515 is a lower standard version. It is used e. g. directly in front of a home signal. Signal aspects Sh0 and Sh1. Height: 6,5 cm.

With filigree brass mast, authentic varnishing, printed signal disk, and underfloor drive unit. Integrated main switching contacts arrange authentic stop. Next main signal shows stop. For authentic slow motion function only item-No. 5216 slow speed resistor is required. Maintenance free due to LED lighting. Signal pictures Vr0 and Vr1. Height: 32 mm.

With underfloor drive unit. Disk is movable and lighted. With one LED, maintenance free. Different kinds of block signals are possible. These ground signals are without mast and used with small track distances less than 4,5 m (H0 about 5,17 cm). Signal aspects Sh0 und Sh1. Height: 1,5 cm.

Changes from yellow/yellow (Vr0) to green/green (Vr1). With 7230 mounting bracket and base plate. Width 16 mm / 5/8*. Length 28 mm / 1-1/8*. Height 67 mm / 2-5/8*.

Changes from yellow/yellow (Vr0) to yellow/green (Vr2). With 7230 mounting bracket and base plate. Width 16 mm / 5/8*. Length 28 mm / 1-1/8*. Height 67 mm / 2-5/8*.

Unit design signal. Brass mast made in filigree photo-etching technology. Faithful painting. Suitable for all analog and digital systems. With patent plug-in foot. Very simple assembly, very simple connection. With 7 LEDs, maintenance-free. Signal images Hp0, Hp1, Hp2, Vr0, Vr1 and Vr2. Matching control modules: Art. 5220 and 5222. Height: 7.9 cm.

Complete set: 2 crossing signals with control unit.

Signal in standard construction with filigree latticed brass mast, authentic varnishing, maintenance free, with electronics and automatic train control. With 2 LEDs, Signal pictures Hp0 and Hp1. Height: 8,6 cm.

Signal in standard construction, with filigree latticed brass mast,authentic varnishing and patented base socket for easy mounting. With 4 LEDs maintenance free. Signal pictures Vr0, Vr1 and Vr2. Suitable control module: Item-No. 5220. Height: 31 mm.

Unit design signal. Brass mast made in filigree photo-etching technology. Faithful painting. Suitable for all analog and digital systems. With patent plug-in foot. Very simple assembly, very simple connection. With 2 red and white LEDs, maintenance-free. Signal images Sh0 and Sh1. Suitable control module: Art. 5221. Height: 4.4 cm.

Signal in standard construction, with filigree latticed brass mast, authentic varnishing and patented base socket for easy mounting. With 3 LEDs maintenance free. Signal pictures Hp0, Hp1 and Hp2. Suitable control module: Item-No. 5222. Height: 44 mm.

Unit design signal with patent plug-in foot for easy installation. With 2 red and white LEDs, maintenance-free. Signal images Sh0 and Sh1. Suitable control module: Art. 5221. Height: 0.8 cm.

Unit design signal. Brass mast made in filigree photo-etching technology. Faithful painting. Suitable for all analog and digital systems. With patent plug-in foot. Very simple assembly, very simple connection. With 4 LEDs, maintenance-free. Signal images Vr0, Vr1 and Vr2. Suitable control module: Art. 5220. Height: 6 cm.

Changes from red/red (Sh0) white/white (Sh1) and controls track power with double solenoid mechanism. Additional hand lever. Width 30 mm / 1-3/16*. Length 70 mm / 2-3/4*. Height 18 mm / 11/16*.

14V AC.

For 14v AC

Unit design signal. Easy assembly. Fully painted metal version. With patent plug-in foot. With 4 LEDs, maintenance-free. Signal images Vr0, Vr1, Vr2. Suitable control module: Art. 5220. Height: 6 cm.

Signal in standard construction, with filigree lattied brass mast, authentic varnishing and patented base socket for easy mounting. With 2 LEDs, maintenance free. Signal pictures Hp0 and Hp1. Suitable control module: Item-No. 5221. Height: 79 mm.

4 LED's, red-red, yellow-yellow

2leds red/green