Hobby & Collectables store with the theme Controllers and Transformers

Contents: 12 curved tracks 24230, 4 straight tracks 24188, 4 straight tracks 24172. Rail junction box, switching power supply 36 VA / 230 V and mobile station for digital entry. Illustrated play book with many tips and suggestions. Expansion options with the C-track expansion packs and with the entire C-Track program.

All of the connections use the new plugs and sockets.Appropriate plugs are included.These connections work the same as the 6083, 6084, and 6088 decoders.

This is a signal mechanism with integrated circuits for controlled stopping of digital locomotives with high-efficiency propulsion.

The module offers an integrated digital decoder (Märklin-Motorola, NMRA-DCC) and is used to control 2 colour light signals (one home signal and one distant signal) with LEDs and a common plus pole or bulbs, provided they do not draw more than 200 mA in total. Therefore it is suitable for all signals scale 0 up to Z (except for the Viessmann signals with multiplex-technology).

Set screw terminals for all connections.Network cable included.

Usable for all 4-aspect colour light departure signals scale 0 to Z (except signals with multiplex-technology). The module provides all 4 block signal pictures (Hp0, Hp1, Hp2 and Sh1)

According to item-No. 5231, single track decoder but for a Märklin C-track, three-way turnout. Controls 2 drives. Control is possible with decoders by function keys of the mobile station! Suitable for Märklin-Motorola, NMRA-DCC and Märklin systems.

The blaze flickering generates a realistic fire effect of a blazing fire. Up to 7 red and yellow miniature bulbs all flicker in a different rhythm, suggesting to the observer the striking effect of a real burning fire. The intensity can be adjusted steplessly to suit the specific application and your own desire.

Decoder to switch on/-off continous current for colour light signals, traction current, lighting, motors, accessories. Compatible with Viessmann Commander, Märklin Digital and Uhlenbrock Intellibox.

Component for programming and reading H0 locomotives with built-in c 82 decoder. Can be used in code locomotive addresses, starting voltage, and acceleration and braking delay.

The relay has 4 single-pole switches. The contacts have a 2 amp capacity. The relay can be activated by a control box, circuit track, contact track, reed switch, or digital decoder.

This decoder can be installed in the C Track three-way turnout (24630) with electric mechanisms. It can be used with the digital formats Motorola and DCC. Connections are made with plug-in contacts, for Märklin and Trix C Track turnouts. An address can be set with coding switches (Motorola Format 1 to 320 / DCC Format 1 to 511), and can also be set on the programming track. Turnout lanterns can be connected and can be controlled (soldering skills required). A digital decoder can be installed...

Usable for all 2-aspect colour light home signals (block signals) and light block signals with LED lighting scale 0 up to Z (except signals with multiplex-technology). The module provides the block signal pictures Hp0 and Hp1.

Effect simulates the arc discharge of a moving train. Established with very small electronics and blue micro-LED. For easy installation in electric locomotives gauge H0.

Electronics for prototypical control of all Viessmann gas lamps in all scales. Suitable for LED lights, too. After switch-on by using push button panel the lamps start to flicker like the prototype and slowly increase in brightness. After approx. 5 seconds the lamps will reach full brightness. During operation the lamps flicker occasionally (simulates variations of the gas pressure).

Longer connecting cable for the 6088 and 60880 s 88 decoders. Length 200 cm / 78-3/4".

With impulse contact for two 3-aspect semaphore signals and also for hobby entry signals, item-Nos. 4021, 4022, the signal control module item-No. 5210 and control module for colour light entry signals item-No. 5222. For activating the signal aspects stop, proceed, proceed at reduced speed and stop for shunting movements by control module item-No. 5210 as well as the control module for colour light signals item-No. 5222.

For four solenoid-operated articles (turnouts, signals, relays) without automatic end-position switch-off. Without feedback. Electrically separated for different circuits.

All of the connections on this control box have the new plugs and sockets.Plugs to work with this control box are included.This control box works in the same manner as the 7272 control box.

Suitable for St. Andrew`s cross item-No. 5058 (H0) and item-No. 5803 (N), and route indicator signals item-No. 5061 and 5062. For automatic operation the electronic relay item-No. 5552 and switching tracks resp. the reed contact item-No. 6840 (H0) are required.