Hobby & Collectables store with the theme Controllers and Transformers

Decoder to switch on/-off continous current for colour light signals, traction current, lighting, motors, accessories. Compatible with Viessmann Commander, Märklin Digital and Uhlenbrock Intellibox.

Usable for all 2-aspect colour light home signals (block signals) and light block signals with LED lighting scale 0 up to Z (except signals with multiplex-technology). The module provides the block signal pictures Hp0 and Hp1.

MSF controller/ transformer. 0–14 V=/0,55 A (550 mA) controllable DC power for track feed. 14 V~/0,5 A (500 mA) constant AC power for lighting, signals and point motors.This controller / transformer guarantees good running qualities with its multisensible speed controller and definite forwards and backwards control. It gives a definite forwards and backwards control and speed settings. Automatic overload protection. The control knob clicks gently into a zero position. Easy connection to the layout using the pressure connection clips.

2 pole for 10 connections each side.

Central unit with built-in locomotive controller. Supplies the layout with power and control commands. The built-in locomotive controller has the same performance range as the Control 80 f. Connecting terminals for transformer and track layout. 1 connection socket for booster (item no. 6017). Operating display through LED. Output power max. 2.5 A. Dimensions 135 x 120 x 80 mm / 5-5/16" x 4-23/32" x 3-5/32".

Contents: 12 curved tracks 24230, 4 straight tracks 24188, 4 straight tracks 24172. Rail junction box, switching power supply 36 VA / 230 V and mobile station for digital entry. Illustrated play book with many tips and suggestions. Expansion options with the C-track expansion packs and with the entire C-Track program.

Web tension between 4 and 16 V adjustable. Light voltage 16 V. Plastic housing. Dimensions 120 x 140 x 80 mm. On / off switch on the power cable. VDE-tested.The safety transformer 32 VA is only suitable for closed rooms.

The ideal large transformer for all requirements. Extremely powerful, with a short circuit indicator light for both track feed and AC feed. With multisensible speed controller and definite forwards and backwards control. Automatische overload protection. The controller gives a definite forwards and backwards control and speed settings. The control knob clicks gently into a zero position. Automatic overload protection. easy connection to the layout using the pressure connection clips.Technical data:■ Running voltage: 0–15 V= / 1.1 A■ Separate accessory output: 14 V~ / 1.0 A

All of the connections on this control box have the new plugs and sockets.Plugs to work with this control box are included.This control box works in the same manner as the 7272 control box.

Set screw terminals for all connections.Network cable included.

Suitable for St. Andrew`s cross item-No. 5058 (H0) and item-No. 5803 (N), and route indicator signals item-No. 5061 and 5062. For automatic operation the electronic relay item-No. 5552 and switching tracks resp. the reed contact item-No. 6840 (H0) are required.

This controller enables automatic stops and independent startup of trains in a station, etc. The stopping time can be adjusted smoothly. This controller is not suitable for Selectrix operation!

Component for programming and reading H0 locomotives with built-in c 82 decoder. Can be used in code locomotive addresses, starting voltage, and acceleration and braking delay.

This decoder can be installed in the C Track three-way turnout (24630) with electric mechanisms. It can be used with the digital formats Motorola and DCC. Connections are made with plug-in contacts, for Märklin and Trix C Track turnouts. An address can be set with coding switches (Motorola Format 1 to 320 / DCC Format 1 to 511), and can also be set on the programming track. Turnout lanterns can be connected and can be controlled (soldering skills required). A digital decoder can be installed...

This is a signal mechanism with integrated circuits for controlled stopping of digital locomotives with high-efficiency propulsion.

With impulse contact for two 3-aspect semaphore signals and also for hobby entry signals, item-Nos. 4021, 4022, the signal control module item-No. 5210 and control module for colour light entry signals item-No. 5222. For activating the signal aspects stop, proceed, proceed at reduced speed and stop for shunting movements by control module item-No. 5210 as well as the control module for colour light signals item-No. 5222.

According to item-No. 5231, single track decoder but for a Märklin C-track, three-way turnout. Controls 2 drives. Control is possible with decoders by function keys of the mobile station! Suitable for Märklin-Motorola, NMRA-DCC and Märklin systems.

Effect simulates the arc discharge of a moving train. Established with very small electronics and blue micro-LED. For easy installation in electric locomotives gauge H0.