Hobby & Collectables store with the theme Track and Railway supplies

This set contains numbers 42232,42223,42222 (2x), 42243 (2x) and two powered turnouts

Can be used for all ROCO rail systems. Low energy consumption, shut off mechanism, 4 single-pole double-throw switches. Can also be installed horizontally. Dimensions approx. 60 x 27 x 45 mm.

Smoke generator for class 80, class 36, class 03.10 and „Württemberger C“/class 18.1 for analogue and digital locomotives.

Change over button with feedback.

Change over button with feedback for single-slip turnouts and symmetric three-way turnouts. These two turnout designs require – if properly controlled – connections for the four possible turnout positions. The switch 10526 offers a definite control of the three permissible turnout settings. Additional switches can be connected side-by-side.

A pack of 12 pieces

For four solenoid-operated articles (turnouts, signals, relays) without automatic end-position switch-off. Without feedback. Electrically separated for different circuits.

Illuminated turnout lantern, to match general purpose below baseboard propulsionmechanism 10030 (optionally DB or SBB) and coupled 90° rotation.

Universal relay with four change-over contacts.Current load per contact: max. 1.5 A.Contents:■ Relais■ 2 mounting screws■ Connector (10603)

8-pole connector, e.g. for 10777.

Assembly kit: Contains a 300 mm flexible strip conductor, 5 bulb carriers, 5 bulbs 16 V/32 mA, 2 wheel current pick-up contacts, fastening material.

Single action button for uncoupling tracks.Use this unit wherever power must be supplied for a short time. The individual buttons are electrically insulated and thus they can operate different power circuits.

Adapters for connecting three single cables with flat connector system (10603).

Universal coupling for NEM 362 standard coupler pocket.Content: 12 pieces/package.

Magnets to trigger the 42605 and 61193 sleeper. Very small construction, therefore can easily be mounted beneath any vehicle. Content: 6 pieces/package.

AC pick-up.Long version.Length 56 mm.

Wheel diameter: 9 mm.Axle length: 24.75 mm.Content: 2 pieces/package.

RP-25 wheel set for direct current, with split axle. Wheel diameter: 11 mm.Axle length: 24.75 mm.Content: 2 pieces/package.

With built-in reed switch, to be actuated by means of a 42256 magnet.This potential-free switching contact can be installed at any point of a track layout. The size and colour of the sleeper goes with the ROCO LINE-track, thus camouflaging the contact.Can also be used as feedback-momentary contact along with feedback module 10787 or detector 10808.

Wheel diameter: 11 mm.Axle length: 24.75 mm.Content: 2 pieces/package.

Wheel diameter: 11 mm.Axle length: 24.75 mm.Content: 2 pieces/package.

Wheel diameter: 11 mm.Axle length: 24.75 mm.Content: 2 pieces/package.