Hobby & Collectables store with the theme Wires, plugs, switches

20 contacts, can be separated at any point

Track rectifier bridges over isolating connections in just one direction (for running though signaled sections in the opposite direction) or protecting the ends of hidden sidings. Not suitable for use with digital layouts.

Can be adjusted through a range of about 10 to 35 ohms (Not over 2 watts continuous operation!) By this mean the power to the locomotive is reduced in pre-determined sections of track, as for example down grades, slow zones and station approaches. Not suitable for digital operation.

For operating uncoupler tracks, or momentary power feed to isolated sections.

A package comes with 10 pieces.

A package comes with 10 pieces.

A package comes with 10 pieces.

A package comes with 10 pieces. These sockets can be used with the standard plugs and sockets from the 71400 assortment.

All of the connections on this control box have the new plugs and sockets.Plugs to work with this control box are included.This control box works in the same manner as the 7272 control box.

All of the connections on this control box have the new plugs and sockets.Plugs to work with this control box are included.This control box works in the same manner as the 7274 control box.

The relay has 4 single-pole switches. The contacts have a 2 amp capacity. The relay can be activated by a control box, circuit track, contact track, reed switch, or digital decoder.

Contents 100 pieces. 66 plugs and 34 sockets. The quantities of each color are based on average needs.

Longer connecting cable for the 6088 and 60880 s 88 decoders. Length 200 cm / 78-3/4".

To insulate joints and to mark cables. Contracts strongly under influence of heat, hot air.