Hobby & Collectables store with the theme H0 Fleischmann Profi

To electrically and mechanically connect a rail track assembly. Can not be used for 6106/6109. (20 pieces)

Transitional rail joints from assortment 6000 to assortment 6100. To connect the flexible tracks 6106/6109. (20 pieces)

Track feed clips (2 poles) can only be connected to the rail connectors on each rail joint. Saves a siding.

To activate the switch contacts 6435 and 9425 or the switching track 9115.To fix onto the underside of vehicles. Surface area 7 x 7 mm, height 5 mm.

To activate the switch contacts 6435 and 9425 or the switching track 9115.To fix onto the underside of vehicles. Diameter: 5 mm, height 3 mm.

Switching rail (1 pole).To trigger off switching impulses for turnouts, signals etc. with driving locomotives. Can be used on any section of the railway layout.Set contents: 1 plastic pin, 1 fastening part and 1 track feed clip, 1 switching rail.

Transitional rail joints to connect Scale H0 tracks of 2.5 mm rail profile height with tracks of 2.1 mm rail profile height. (20 pieces)By simply exchanging the standard mounted rail joints to the transitional rail joints 6437 you can adjust the turntable and the expansion set 6155 to track layouts of 2.1 mm high rail profiles.

Used for the diagonal crossing tracks.

R1 = 356,5mm Radius

R2 = 420 mm Radius

R2 = 420 mm Radius

Switch contact to trigger off electrical switching impulses up to a max. of 800 mA. Can be connected to the solenoid switches 942601 and 942701.