Hobby & Collectables store with the theme Catenary

1 wire for power supply. Height 97 mm / 3-7/8*.

2 wires to supply power. Instructions for setting up catenary. Height 97 mm / 3-7/8*

The cross span assembly is a pre-assembled unit consisting of span wires, cross span support wires, and 3 adjustable catenary wire hangers. 2 metal tower masts on bases with mounting screws and slide-on connections are included. The mast spacing can be adjusted up to 235 mm / 9-1/4". The span wires are made of welded steel wire, the cross span support wires are elastic, and the masts and catenary wire hangers are electrically separated from each other. Mast height 150 mm / 5-7/8".

This mast is for supplying power to an area of catenary and for signal blocks. It is a metal lattice mast and has a metal hanger arm. A base with a mounting screw and a slide-on connection is included. An additional base as a clip for C Track is included. Feeder wire for C Track included. Height 100 mm / 3-15/16". 1 piece.

This is a metal round mast and has a metal hanger arm. A base with a mounting screw and a slide-on connection is included. An additional base as a clip for C Track is included. Feeder wire for C Track included. Height 100 mm / 3-15/16". 5 pieces to a package.

This is a metal lattice mast. A base with a mounting screw and a slide-on connection is included. This mast is suitable for cross span wires or for single hanger arms. All four sides of the mast have mounting points. This mast can be used for all track systems. Height 170 mm / 6-11/16". One mast to a package.

This hanger arm is made of steel wire with hangers for contact and messenger wires. It can be installed on regular masts and on tower masts. 5 pieces to a package.

This is a bracket made of metal for mounting a 74151 single hanger arm on the 74142 tower mast. The bracket has 4 easily bent tabs for mounting the bracket on the mast. A package comes with 5 pieces.

This is a replacement base for standard masts. It can be shortened for all available H0 track systems with or without roadbed. The base comes with a screw suitable for mounting a mast. 20 pieces to a package.

The catenary wire is made of welded steel wire. Length 172.5 mm / 6-13/16". Designed for curved track with a radius of 437.5 mm / 17-1/4" (C Track, M Track). 16 catenary wires are required for a circle, each one making up 22.5° of a curve. 5 pieces to a package.

The catenary wire is made of welded steel wire. Length 167.5 mm / 6-5/8". Designed for curved track with a radius of 424.6 mm / 16-11/16" (K Track). 16 catenary wires are required for a circle, each one making up 22.5° of a curve. 5 pieces to a package.

This interrupter is for electrical separation of the power circuit in the catenary. It can be installed at any point by cutting the catenary wire and fixing it in place in the insulated receptacles. Skids with variable holders are included for a continuous path for pantograph contact strips. 1 piece to a set.

This kit is for a custom set-up. It consists of cross span wires, cross span support wires, insulators and 5 catenary wire hangers. 2 tower masts (74142) are required at a distance of up to 500 mm / 19-11/16". The cross span wires are made of steel; the cross span support wires can be realistically tensioned. The catenary wire hangers are electrically insulated. This kit comes with set-up instructions.

This catenary wire is made of welded steel wire. Length approximately 142 mm / 5-9/16". This catenary wire is designed for the transition from the old Märklin catenary to the new catenary system. 3 pieces to a package.

This catenary wire is for adjustment of individual track lengths. One end has the standard eyelets for hanging the wire on a mast, and the other end has a receptacle for a cut catenary wire with an open end. The precise length can be adjusted during installation. 5 pieces to a package.

For hooking up signals located by tower masts and for supplying power anywhere on a layout. Length 600 mm / 23-5/8*.

For hanging in the tower masts. Depending on the track distance, it spans up to 4 tracks. Span 280 mm

For all crossings and double slip switches (except 2257 and 2275).