Hobby & Collectables store with the theme Scenery

Height 56 mm / 2-7/32".

Height 124 mm / 4-7/8".

Height 56 mm / 2-7/32".

Lattice mast with 2 metal cross girders in lattice girder design. 6 doubled suspension insulators with eyelets (0.8 mm / 1/32") for carrying a thread as a high voltage line. Height 292 mm /11-1/2", width 205 mm / 8-1/16".

The mast is a lattice design unit constructed of metal. The insulators are made of plastic with holes (0.8 mm / 1/16") for wire strands or nylon wire or thread as a power line. Height 266 mm / 10-1/2", width 206 mm / 8-1/8", base 35 x 35 mm / 1-3/8" x 1-3/8".

Krümmungshalbmesser 437,4 mm. Nur für Metallgleise (Parallelkreis). Länge und Radius wie Gleis 5200.

Radius 360 mm / 14-3/16". Curve 30°. Width 64 mm / 1-5/16". For R1 radius C track curved sections. One ramp section is the same length as the 24130 track section.

For K or M Track. 3 clips for mounting K Track. Length 180 mm / 7-3/32".

Radius 360 mm / 14-3/16". For K or M Track. 3 clips for mounting K Track. The length and radius are the same as 2221 and 5100 track.

Radius 424.6 mm / 16-3/4". For K Track only (standard curve II). 3 clips for mounting track. The length and radius are the same as 2231 track.

2.5 mm / 3/32" high. This is used as a pillar foundation.

For K or M Track. 6 clips for mounting K Track and instructions for setting up bridges. Arch height 117 mm / 4-5/8". Length 360 mm / 14-3/16".

3 mm / 1/8" high. This base plate can be used only in conjunction with the 7250 base plate.

Height 100 mm / 3-15/16".

Height 100 mm / 3-15/16".

Height 100 mm / 3-15/16".

Height 65 mm / 2-9/16".

Height 49 mm / 1-15/16".