UHU hart POR UHU 40g Quick-setting special adhesive for polystyrene

DESCRIPTIONPROPERTIES- Quick-setting- Elastic adhesive film is colourless, non-ageing- Waterproof- Technical documentationAPPLICATIONSUITABLE FOR: expanded polysterene, e.g. Styropor® also in combination with other materials, e.g. wood, paper, metal, ceramic, plaster, fabric and various plastics.HANDLINGBEFORE USE:Working conditionsDo not use at temperatures below +5°C.Personal safetyUHU por contains volatile, easily inflammable solvents, appropriate precautions should therefore be taken during working and storage.Surface requirementsThe surface must be dry, clean and free of dust and grease.DURING USE:Directions for useThe adhesjve is normally applied to both surfaces. The period of adhesion depends on the quantity of adhesive applied and the absorption capacity of the material for bonding. Firm adhesion is obtained between 5 and 20 minutes after application. The correct moment for joining has been reached when the adhesive, gently touched with the fingertips, has become touch-dry (so-called finger test).AdviceThis information is the result of carefully executed tests. This Technical Data Sheet has been prepared to the best of our knowledge to provide you with advice when gluing. We cannot be held responsible for the results or any damage suffered, as the variety of factors involved (type and combination of materials and working method) are beyond our control. Users have to carry out their own checks and trials. Liability can only be accepted for the consistently high quality of our product.AFTER USE:Stains/residueLight petrol should be used for the removal of smeared adhesive and the cleaning of working tools (brushes etc.).Storage conditionsStore in tightly closed packaging in a dry, cool and frost-free place.