Hobby & Collectables store with the theme H0 Märklin C-Track

6 pieces. 10 x 5 x 1.5 mm / approx. 25/64" x 3/16" x 1/16". This magnet is for activating 7555 reed switches. It is for locomotives with little ground clearance.

The feeder wire set comes with interference suppression and overload protection. It includes a circuit board with spade connectors for C Track and a red and a brown feeder wire. One feeder wire set is needed for each conventional track circuit. One 74046 feeder wire set should be installed in each track power circuit to protect against possible radio and television interference caused by locomotives in operation. This feeder wire set also offers effective protection against overloads and short...

1.6 x 13 mm / 1/16" x 1/2" with cross point head. Contents 200 pieces.

This decoder can be installed in the C Track three-way turnout (24630) with an electric mechanism. The digital formats supported are mfx, Motorola, and DCC. Connections are with plug contacts, for Märklin and Trix C Track three-way turnouts. An address can be set with coding switches (MM 1–320, DCC 1–511) as well as by CVs (MM 1–320, DCC 1–2044) using the programming track.

This screwdriver has a cross point size 00 (Ph). For 74990 (C) and 7599 (K) track screws.

24 rail joiners. These are for connecting the rails at the joints of cut sections of C Track. This provides a mechanical joint and a ground contact for the rails.

Red and brown feeder wires with spade connectors at both ends, for C Track. Length 2 meters / 78-3/4".