Hobby & Collectables store with the theme Model Railways and Scenery

Removable roadbed slope. This track is used on both branches of the wide radius turnouts and wide angle crossings.

R1 = 360 mm

R2 = 437.5 mm

Removable roadbed slopes. This track section is required on both branches of the 62771 and 62772 wide radius curved turnouts.
R3 = 515 mm

R3 = 515 mm

R4 = 579.3 mm
Parallel curve to Radius R3 with a spacing of 64.3 mm / 2-9/16". 12 sections of track form a circle with an outer diameter of 120 cm / 47-1/4".

R5 = 643,6 mm
Parallel curve to Radius R4 with a spacing of 64.3 mm / 2-9/16". 12 sections of track form a circle with an outer diameter of 133 cm / 52-3/8".

R9 = 1114.6 mm
Complementary curve for the wide radius turnouts. Also suitable for use in constructing sweeping main lines.

Manual hand lever included. Can be retrofitted with a turnout mechanism, a digital decoder and turnout lanterns.

Manual hand lever included. Can be retrofitted with a turnout mechanism, a digital decoder and turnout lanterns.

Fictional fire engine based on an Henschel EA 500 electric locomotive. Low side car for transporting a fire engine aerial ladder, stake car with operations management and a tank car "fire-fighting water" from DB Emergency Technology.

Releases May 2020
Length over buffers: 10.5 cm. Min Curve Radius: 35.8 cm.

Operating number: 78 134 ~ Length over buffers: 170 mm ~ Minimum radius: 358 mm

Operating number: 78 134 ~ Length over buffers: 170 mm ~ Minimum radius: 358 mm

Operating number: 78 134 ~ Length over buffers: 170 mm ~ Minimum radius: 358 mm

Length 220 mm / 8-5/16".