Hobby & Collectables store with the theme Track and Railway supplies

Detachable hand lever included. Turnout branch 22° 30'. Branch same as 2232. Length of the straight side 168.9 mm / 6-5/8". A 75491 solenoid mechanism can be installed on these turnouts.

Usable for all 2-aspect colour light home signals (block signals) and light block signals with LED lighting scale 0 up to Z (except signals with multiplex-technology). The module provides the block signal pictures Hp0 and Hp1.

Reed contact for releasing of switch processes by the moving train. For mounting directly into the track. Usable as well for 2 rail tracks or with rail between traction rails. The switch contact operates by train magnets contactless, e. g. item-No. 6841. Up to 2 A. L: 38 mm.

This is a replacement base for standard masts. It can be shortened for all available H0 track systems with or without roadbed. The base comes with a screw suitable for mounting a mast. 20 pieces to a package.

Two-conductor wire for track power connections. Suitable as a mechanical track connector with the 14901 flex track.

Minitrix terminals and contacts allow convenient connection of traction power supply lines (eg signal disconnects, shut-down tracks, block fuses, etc.) anywhere on the track, even in the middle of complicated switch roads.

Interior lighting unit for IC/EC control cab coaches. Spare bulb: 9530

These spade connectors can be used for the contact fingers on C Track. They are for all Märklin wire from 0.19 sq. mm / 0.0003 sq. in. or 0.02 in. diameter to 0.75 sq. mm / 0.001 sq. in. or 0.04 in. diameter. 1 package contains 20 spade connectors.

For the 73400 interior lighting kit. Includes an asymmetrical pickup shoe and a ground spring.

For the 73400 interior lighting kit. Includes a symmetrical pickup shoe and a ground spring.

Both circles are R1 with a distance of 77,4 mm in between tracks.

Both circles are R1 with a distance of 77,4 mm in between tracks.

This can be installed anywhere on the layout under the rails.

MSF controller/ transformer. 0–14 V=/0,55 A (550 mA) controllable DC power for track feed. 14 V~/0,5 A (500 mA) constant AC power for lighting, signals and point motors.This controller / transformer guarantees good running qualities with its multisensible speed controller and definite forwards and backwards control. It gives a definite forwards and backwards control and speed settings. Automatic overload protection. The control knob clicks gently into a zero position. Easy connection to the layout using the pressure connection clips.

This is installed between the third rail clips at the ends of the track.

This is installed at rail joints between the third rail clips to separate track circuits. Contents 5 pieces.

Traction tyres for DC locomotives. For wheels with diameter 10.3–12.8 mm.

Contains 10 pieces/package.

Contains 10 pieces/package

Corresponds with Fleischmann 544007
Contains 10 pieces/package.

Corresponds with Fleischmann 544001
Contains 10 pieces/package.

R1 = 357 mm radius / 745 mm outer-diameter. 24 pieces needed to make a circle.

R2 = 415 mm radius / 860 mm outer-diameter. 24 pieces needed to make a circle.

R2 = 415 mm radius / 860 mm outer-diameter.

Set of springs. Suitable for Marklin M-turnouts.